The Best Selection of Quality Dog Fences at the Best Price

 View Cart

welded wire dog fence Kits




McGregor Fence sales dog Danny

Welded Wire Kits

Our strongest kits, these will resist chewing and pawing even better then our metal hexagrid kits. Made with 14 gauge steel wire that is galvanized and coated with black pvc, they create fences are both low-key and attractive. Especially if equipped with a top rail, the fence will have a firm, well-finished, professional look. The mesh openings are small for welded wire fences (2 x 4 inches for the 4-foot fences, 1.5 x 4 inches for the 6-footers), but even so these rectangular  openings do provide some purchase for a dog's hind paws. So if your dog avidly tries to clamber over fences, consider getting a metal hexagrid dog fence instead. Should digging prove an issue, all of our fences can be supplemented with an anti-digging barrier that ends the problem. This welded wire fencing has an expected life of over twenty years.

dog fence kit installed, McGregor metal hexagrid fence kit 

Our welded wire dog fence kits come in 100, 200, and 300-foot lengths, and two or more kits can be combined to create a dog fence of any length. Kit heights are 4 and 6 feet. Kits with top rails are available. Enough stakes to provide at least one stake for every 2 feet of fencing are included. Digging barriers that lie flat and do not interfere with lawnmowers are available as needed.

The posts that come with these kits are permanent good-looking round galvanized steel posts with a black pvc coating. Insert them 2 feet into the ground. Run the tough top support wire or top rail along the top of the fence with fittings provided in the kit. Attach the fencing to the posts and support wire or top rail with strong black zip-lock ties, and secure the fencing to the ground with foot-long ground stakes. That's all there is to it.

The items in each kit provide everything needed to create four corners and either 2 gate openings or 1 gate opening and 2 fence ends (at a place where the fence butts up against a building or other structure). Please note, however, that gates and braces (the latter useful for tall fences in heavy snow zones) are not included and instead are listed separately on these pages (see the left-hand menu). For a listing of all the materials offered in each kit below, click on the kit's picture or scroll down below the catalog entries to the kip parts section.

Our Welded Wire Kits with Top Support Wires

Our Welded Wire Kits with Top Rails



Kit Parts: Welded Wire Kits with Top Support Wire


Parts in the 4 x 100 Foot Welded Wire Kit (DG-WW-4x100) with Top Support Wire:
  • 4 x 100-foot roll of black pvc-coated 14-gauge welded wire fencing with 2 x 4 inch mesh openings (1 roll, product 14-42)
  • Eight round pvc-coated black posts for a 4-foot fence with drive sleeves and flat black caps; 1-5/8 inch diameter posts (8 of product 15-03E-4FT-1)
  • Drive cap for driving in post sleeves (1 drive cap, product 15-03C)
  • Brace bands with nuts, bolts, and washers for anchoring the fencing and top support wire (1 bundle of 8 bands, product 15-12)
  • Black top support wire, pvc-coated with 13.5-gauge steel core, 110 feet (product 16-021-110)
  • 2 bags of 8-inch zip-lock ties for attaching the fencing to the posts and top support wire (2 bags of 100, product 17-04)
  • 30 kinked galvanized ground stakes 1 foot long (1 bundle of 30, product 18-01)
  • Installation instructions (product INST-01-DOG-1) 

Parts in the 6 x 100 Foot Welded Wire Kit (DG-WW-6x100) with Top Support Wire:

Same as in kit DG-WW-4x100 above, but replacing the 4 x 100 foot fence roll with a 6 x 100 foot roll (product 14-43) and replacing the posts for a 4-foot fence with posts for a 6-foot fence (product 15--03E-6FT-1).


Parts in the 4 x 200 Foot Welded Wire Kit (DG-WW-4x200) with Top Support Wire:
  • Two 4 x 100-foot rolls of black pvc-coated 14-gauge welded wire fencing with 2 x 4 inch mesh openings (2 rolls, product 14-42)
  • Sixteen round pvc-coated black posts for a 4-foot fence with drive sleeves and flat black caps; 1-5/8 inch diameter posts (16 of product 15-03E-4FT-1)
  • Drive cap for driving in post sleeves (1 drive cap, product 15-03C)
  • 16 brace bands with nuts and bolts for anchoring the fencing and top support wire (2 bundles of 8 bands, product 15-12)
  • Black top support wire, pvc-coated with 13.5-gauge steel core, 220 feet (product 16-021-220)
  • 3 bags of 8-inch zip-lock ties for attaching the fencing to the posts and top support wire (3 bags of 100, product 17-04)
  • 60 kinked galvanized ground stakes 1 foot long (1 bundle of 30, product 18-01)
  • Installation instructions (product INST-DG-WW) 

Parts in the 6 x 200 Foot Welded Wire Kit (DG-WW-6x200) with Top Support Wire:

Same as in kit DG-WW-4x200 above, but replacing the 4 x 100 foot fence rolls with a 6 x 100 foot rolls (product 14-43), replacing the posts for a 4-foot fence with posts for a 6-foot fence (product 15--03E-6FT-1), and increasing the bags of zip-lock ties (product 17-04) from 3 to 4.


Parts in the 4 x 300 Foot Welded Wire Kit (DG-WW-4x300) with Top Support Wire:

  • Three 4 x 100-foot rolls of black pvc-coated 14-gauge welded wire fencing with 2 x 4 inch mesh openings (3 rolls, product 14-42)
  • Twenty-one round pvc-coated black posts for a 4-foot fence with drive sleeves and flat black caps; 1-5/8 inch diameter posts (14 of product 15-03E-4FT-1)
  • Drive cap for driving in post sleeves (1 drive cap, product 15-03C)
  • Brace bands with nuts and bolts for anchoring the fencing and top support wire (3 bundles of 8 bands, product 15-12)
  • Black top support wire, pvc-coated with 13.5-gauge steel core, 350 feet (product 16-021-350)
  • 5 bags of 8-inch zip-lock ties for attaching the fencing to the posts and top support wire (5 bags of 100, product 17-04)
  • 90 kinked galvanized ground stakes 1 foot long (3 bundles of 30, product 18-01)
  • Installation instructions (product INST-01-DOG-1) 

Parts in the 6 x 300 Foot Welded Wire Kit (DG-WW-6x300) with Top Support Wire:

Same as in kit DG-WW-4x300 above, but replacing the 4 x 100 foot fence rolls with a 6 x 100 foot rolls (product 14-43), replacing the posts for a 4-foot fence with posts for a 6-foot fence (product 15--03E-6FT-1), and increasing the bags of zip-lock ties (product 17-04) from 5 to 6.

 

Kit Parts: Kits with Top Rails


Parts in the 4 x 100 Foot Welded Wire Kit with Top Rail (DG-WW-TR-4x100):

  • 4 x 100-foot roll of welded wire fencing (1 roll, product 14-42)
  • 6-foot round pvc-coated black posts, 1-5/8 inch diameter (10 posts, product 15-03P-6FT-1)
  • Brace bands, black, for tops of posts, to anchor fencing (12 bands with nuts, bolts, washers; product 15-10-1)
  • Top rail pipes, black, pvc-coated, with male end, 100 x 1-3/8 inches (13 of product TOP-RAIL)
  • Dome caps, black, for 1-5/8 inch round posts (8 of product 15-15)
  • Loop caps, black, for 1-3/8 inch line posts (4 of product 15-18)
  • Rail ends, black, for 1-3/8 inch top rail pipes (12 of product 15-19)
  • Self-tapping screws (1 bag of 16 screws, product CF-SCREW-16)
  • 8-inch zip-lock ties for attaching fencing to posts and top support wire (2 bags of 100, product 17-04)
  • 30 kinked galvanized ground stakes 1 foot long (1 bundle of 30, product 18-01)
  • Installation instructions (product INST-DG-WW) 

Parts in the 6 x 100 Foot Welded Wire Kit with Top Rail (DG-WW-TR-6x100):

Same as in kit DG-WW-TR-4x100 above, but replacing the 4 x 100 foot fence roll with a 6 x 100 foot roll (product 14-43) and replacing the 6-foot posts with 8-foot posts (product 15--03P-8FT-1).

 

Parts in the 4 x 200 Foot Welded Wire Kit with Top Rail (DG-WW-TR-4x200):

  • 4 x 100-foot rolls of welded wire fencing (2 rolls, product 14-42)
  • 6-foot round pvc-coated black posts, 1-5/8 inch diameter (20 posts, product 15-03P-6FT-1)
  • Brace bands, black, for tops of posts, to anchor fencing (12 bands with nuts, bolts, washers; product 15-10-1)
  • Top rail pipes, black, pvc-coated, with male end, 100 x 1-3/8 inches (25 of product TOP-RAIL)
  • Dome caps, black, for 1-5/8 inch round posts (8 of product 15-15)
  • Loop caps, black, for 1-3/8 inch line posts (14 of product 15-18)
  • Rail ends, black, for 1-3/8 inch top rail pipes (12 of product 15-19)
  • Self-tapping screws (1 bag of 16 screws, product CF-SCREW-16)
  • 8-inch zip-lock ties for attaching fencing to posts and top support wire (3 bags of 100, product 17-04)
  • 60 kinked galvanized ground stakes 1 foot long (2 bundles of 30, product 18-01)
  • Installation instructions (product INST-DG-WW) 

Parts in the 6 x 200 Foot Welded Wire Kit with Top Rail (DG-WW-TR-6x200):

Same as in kit DG-WW-TR-4x200 above, but replacing the 4 x 100 foot fence rolls with a 6 x 100 foot rolls (product 14-43), replacing the 6-foot posts with 8-foot posts (product 15--03P-8FT-1), and increasing the zip ties (17-04) from 3 to 4 bags.


Parts in the 4 x 300 Foot Welded Wire Kit with Top Rail (DG-WW-TR-4x300):

  • 4 x 100-foot rolls of welded wire fencing (3 rolls, product 14-42)
  • 6-foot round pvc-coated black posts, 1-5/8 inch diameter (30 posts, product 15-03P-6FT-1)
  • Brace bands, black, for tops of posts, to anchor fencing (12 bands with nuts, bolts, washers; product 15-10-1)
  • Top rail pipes, black, pvc-coated, with male end, 100 x 1-3/8 inches (38 of product TOP-RAIL)
  • Dome caps, black, for 1-5/8 inch round posts (8 of product 15-15)
  • Loop caps, black, for 1-3/8 inch line posts (24 of product 15-18)
  • Rail ends, black, for 1-3/8 inch top rail pipes (12 of product 15-19)
  • Self-tapping screws (1 bag of 16 screws, product CF-SCREW-16)
  • 8-inch zip-lock ties for attaching fencing to posts and top support wire (5 bags of 100, product 17-04)
  • 90 kinked galvanized ground stakes 1 foot long (2 bundles of 30, product 18-01)
  • Installation instructions (product INST-DG-WW) 

Parts in the 6 x 300 Foot Welded Wire Kit with Top Rail (DG-WW-TR-6x300):

Same as in kit DG-WW-TR-4x300 above, but replacing the 4 x 100 foot fence rolls with 6 x 100 foot rolls (product 14-43), replacing the 6-foot posts with 8-foot posts (product 15--03P-8FT-1), and increasing the zip ties (17-04) from 5 to 6 bags.

      

Kit Installation Instructions

       Click here to view Installation instructions for all our welded wire dog fence kits.

 

 

Continue
Back to top
Back to home page